Italiano
English
HRSBF250 - Active infrared beam
Published at 20 / 9 / 2009 |Archived in: antintrusion, active infrared beams, products
Triple beam active detector for outdoor and indoor operations. The detector is composed by a transmitter and a receiver.
The alarm condition is generated from the interruption of the two beams for a programmable period.
Fast optical alignment looking through the viewfinder. Adjustable beams position without screwdrivers.
Test Point to check the maximum alignment output voltage. The alignment is facilitated by an optical LED signaling the received level, present both on the receiver and transmitter units.
The units can be addressed to allow the installation of more barriers on the same plant, and can be selected up to 8 different frequencies to avoid interferences.
The receiver include a buzzer that sounds when the detector is in alarm state. The buzzer also indicates the state of the detector when in programming mode. The response time can be adjust according to the installation and to the movement that must be detected from 50 to 240ms. Tamper protection.
Operating temperature -25°C / +55°C.
Protection rating IP54.
The detector can be fixed into flat wall or fixed on pole supports using the bracket supplied.
Beam: 3
Outdoor coverage 100 ~ 250m
Indoor coverage 100 ~ 750m
Power supply 12Vdc, max 180mA
Dimension 95 x 270 x 100mm (L x H x P).
Watch video about this product.
October 1st, 2009 at 15:58
[...] I riferimenti sono: HRSBT030 HRSBT060 HRSBT100 HRSBF250 [...]